Wednesday, January 21, 2009

 

Top ten selling LCD TVs of early 2009?

I can't vouch for accuracy, but might be worth checking out if you're looking to buy a new LCD television.

http://www.lcdtvbuyingguide.com/top10.shtml

Hope this helps you make your TV buying decision.

Labels: , ,


Wednesday, January 7, 2009

 

Samsung unveils latest and thinnest TV

Samsung Electronics plans to unveil a flat-panel TV that's as thin as just 6.5-millimeters at this week's International Consumer Electronics Show in Las Vegas, it said Sunday.

The TV set, few details of which were immediately available, is between 6.5mm and 7mm across its width and has an LED (light emitting diode) backlight.

The backlight sits behind the LCD panel and generates the light that shines through it to allow the image to be seen. Most LCD panels use thicker backlights that make use of fluorescent lights but LEDs are fast finding favor with TV makers for their thinness and better overall light.

Read the full article here.

Labels: , , , ,


 

Proposed California energy regulations may make plasma TVs illegal

Plasma televisions use more power than LCD TVs, and California uses a LOT of electricity. In an effort to cut back on energy use, they're requiring energy efficiency levels that are higher than current plasma models can achieve.

Of course, California residents can go to neighboring states or order online to get their beloved plasma, but I think it's more likely that plasma TV manufacturers might try to meet the guidelines of this huge television market.

Labels: , , ,


Wednesday, December 10, 2008

 

Sony closing Pennsylvania LCD television plant by 2010

Tuesday Sony made an announcement about an overhaul of their operations, and it looks like the first change will be the closing of one of their LCD TV plants. The plant manufactured LCD TVs, and provided repairs and logistics services. Sony appears to be tightening up their operations in the wake of poor economic conditions worldwide.

Labels: , , ,


Friday, December 5, 2008

 

LCD versus Plasma TV

This is a very thorough guide about the differences between Plasma and LCD televisions.

Very helpful if you're trying to decide:

http://www.john-michaeldelvalle.com/2008/12/05/lcd-vs-plasma-television-guide/

Labels: ,


 

Toshiba REGZA television gets PC Magazine's first GreenTech Award for an HDTV

Apparently, this Toshiba REGZA television, an LCD TV, exceeded energy efficiency requirements (as did all involved in the manufacturing process).

It also helped that Toshiba, Panasonic, and Sharp have joined forces to recycle old electronics.

You can read more about the testing process here:

http://www.marketwatch.com/news/story/Toshibas-REGZA-R-TV-Wins/story.aspx?guid={35E776C4-D530-4487-BAAF-416A26D35B5F}

Labels: , , , , , , ,


Monday, November 17, 2008

 

JVC Owner's Manuals Online

If you need a replacement, electronic version of your manual, JVC has them online on the JVC website.

Below are some quicklinks to those looking for specific products:

JVC Plasma Flat Panel - link
JVC LCD Flat Panel - link
JVC LCD Monitor - link

JVC Refrigerator - link
JVC Laundry - link
JVC Air Conditioner - link
JVC Dishwasher - link
JVC Cooking - link

There's a few more on the website if you don't see your product here.

Labels: , , , , , , , , ,


 

Important Information regarding 2007 Model Year 52" BRAVIA® LCD Panel Warranty – Vertical Line or Fixed screen Image

Critical alert, see http://esupport.sony.com/US/perl/news-item.pl?mdl=KDL52XBR4&news_id=276 for more information:

2007 Model Year 52" BRAVIA® Televisions

U.S. Models: KDL-52XBR4, KDL-52W3000

It has come to our attention that a limited number of 52" BRAVIA® LCD televisions (models listed above), after a short period of operating time, might exhibit a vertical line or other fixed pattern on the LCD panel viewable when the TV is turned Off (in Standby). The cause of this issue is unique, and photo examples can be seen here:

(See Sony link above to view pictures).

As part of our commitment to quality, Sony is announcing that for any owner of these model televisions who paid out-of pocket expenses on or before November 30, 2008 for an estimate or repair service to replace the LCD Panel for this specific issue, Sony will reimburse the customer by mail for his/her parts and labor expenses. To receive reimbursement, please completely follow the directions on the claim form for reimbursement; all claims must be postmarked by January 31, 2009. See the claim form for complete terms and conditions.

In addition, for any customer who later experiences this specific issue on one of the affected models, Sony will cover the cost of the LCD panel replacement (parts and labor) at no charge through 18 months from the original date of purchase. All other terms of the Sony limited warranty continue to apply. Sony utilizes a network of hundreds of qualified independent third-party servicers to perform in-home television warranty service. Sony, through its authorized servicer network, will endeavor to repair your set within 30 days of your first contact. For diagnosis, warranty service, or if you are not provided a repair within 30 days, please contact Sony at (888) 649-7669.

If you're in Alabama and have this problem, please visit our website and contact us by phone or email so we can take care of your problem: Television Repairs in Alabama

Labels: , , , , ,


Friday, November 14, 2008

 

Interesting LG article about LCD TV panels

Here's a sample of an interesting article in LG's Knowledge Base:

There's far more to building an LCD than simply creating a sheet of liquid crystals. The combination of four facts makes LCDs possible:
• Light can be polarized. Liquid crystals can transmit and change polarized light.
• The structure of liquid crystals can be changed by electric current.
• There are transparent substances that can conduct electricity.
An LCD is a device that uses these four facts in a surprising way!
To create an LCD, you take two pieces of polarized glass. A special polymer that creates microscopic grooves in the surface is rubbed on the side of the glass that does not have the polarizing film on it. The grooves must be in the same direction as the polarizing film. You then add a coating of nematic liquid crystals to one of the filters. The grooves will cause the first layer of molecules to align with the filter's orientation. Then add the second piece of glass with the polarizing film at a right angle to the first piece.

Read the rest (with helpful pictures) here: http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=2245

Labels: , , ,


This page is powered by Blogger. Isn't yours?

Subscribe to Posts [Atom]